Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains

218 KB – 18 Pages

PAGE – 1 ============
Congratulations on your purchase of the ECX® BrutusŽ Monster Truck This 1/10-scale model introduces you to the sport of RC driving. Herzlichen Glückwunsch zum Kauf des ECX Brutus Monster Truck Dieses 1/10 Scale Model öffnet Ihnen die Welt des RC Car Sports. Nous vous félicitons pour l™achat de l™ECX Brutus Monster Truck Ce modèle 1/10 vous initie à la conduite RC.Congratulazioni per l™acquisto di questo Brutus Monster Truck Questa vettura in scala 1/10 vi introdurrà nel mondo dei modelli RC.INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D™UTILISATION MANUALE DI ISTRUZIONI 1/10 2WD ELECTRIC MONSTER TRUCK ECX03055®BRUTUSŽ

PAGE – 2 ============
2ENBRUTUS MONSTER TRUCK™NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit and click on the support tab for this product. As the user of this product, you are solely responsible for operating in a manner that does not endanger yourself and others or result in damage to the product or property of others. This model is controlled by a radio signal subject to interference from many sources outside your control. This interference can cause momen- tary loss of control, so it is advisable to always keep a safe distance in all directions around your model as this margin will help avoid collisions or injury. • Never operate your model with low transmitter batteries. • Always operate your model in open spaces away from full-size vehicles, traffic and people.• Never operate the model in the street or in populated areas for any reason.• Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) you use.• Keep all chemicals, small parts and anything electrical out of the reach of children.• Never lick or place any portion of the model in your mouth as it could cause serious injury or even death.• Exercise caution when using tools and sharp instruments. • Take care during maintenance as some parts may have sharp edges. • Immediately after using your model, do NOT touch equipment such as the motor, electronic speed control and battery, because they generate high temperatures. You may burn yourself seriously touching them.• Do not put fingers or any objects inside rotating and moving parts, as this may cause damage or serious injury. • Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning your transmitter off. • Keep the wheels of the model off the ground when checking the operation of the radio equipment.WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is ess ential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damag e or serious injury. MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superfi cial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND little or no possibility of injury. Age Recommendation: Not for children under 14 years. This is not a toy. WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to , compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. TABLE OF CONTENTS SAFETY PRECAUTIONS AND WARNINGS Water-resistant Vehicle with Waterproof Electronics ..3 Specifi cations ..3 Components .4 Quick Start.4 Vehicle Preparations 4 Installing the Battery4 Transmitter Controls .5 Installing Transmitter Batteries .5 Binding 6 Changing the Throttle Limit .6 Getting Started6 Operation7 When You Are Finished..7 Motor Care 7 Maintenance 8 Setting the Gear Mesh8 Electronic Speed Control (ESC) ..8 Electrical Layout .8 Shock Cleaning9 Ride Height Adjustment .9 Shock Absorber Parts ..9 Fasteners 9 Troubleshooting Guide .10 Limited Warranty 11 Warranty and Service Contact Information ..12 FCC Information12 IC Information12 Parts Diagram..46–48 Replacement Parts .49 Optional Parts50 Recommended Parts .50

PAGE – 3 ============
3ENBRUTUS MONSTER TRUCK™SPECIFICATIONS WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS Your new Horizon Hobby vehicle has been designed and built with a combination of waterproof and water-resistant components to allow you to operate the product in many “wet conditions,” including puddles, creeks, wet grass, snow and even rain.While the entire vehicle is highly water-resistant, it is not completely waterproof and your vehicle should NOT be treated like a submarine. The various electronic components used in the vehicle, such as the Electronic Speed Control (ESC) and servo(s) are waterproof, however, most of the mechanical components are water-resistant and should not be submerged.Metal parts, including the bearings, hinge pins, screws and nuts, as well as the contacts in the electrical cables, will be susceptible to corrosion if additional maintenance is not performed after running in wet conditions. To maximize the long-term performance of your vehicle and to keep the warranty intact, the procedures described in the “Wet Conditions Maintenance” section below must be performed regularly if you choose to run in wet conditions. If you are not willing to perform the additional care and maintenance required, then you should not operate the vehicle in those conditions.CAUTION: Failure to exercise caution while using this product and complying with the following precautions could result in product malfunction and/or void the warranty. General Precautions • Read through the wet conditions maintenance procedures and make sure that you have all the tools you will need to properly maintain your vehicle.• Not all batteries can be used in wet conditions. Consult the battery manufacturer before use. Do not use Li-Po batteries in wet conditions.• The included transmitter is not waterproof or water-resistant. If using a different transmitter than the one included, consult your transmitter’s manual or the manufacturer before operation.• Never operate your transmitter or vehicle where lightning may be present.• Do not operate your vehicle where it could come in contact with salt water (ocean water or water on salt-covered roads), contaminated or polluted water. Salt water is very conductive and highly corrosive, so use caution.• Even minimal water contact can reduce the life of your motor if it has not been certified as water-resistant or waterproof. If the motor becomes excessively wet, apply very light throttle until the water is mostly removed from the motor. Running a wet motor at high speeds may rapidly damage the motor. • Driving in wet conditions can reduce the life of the motor. The additional resistance of operating in water causes excess strain. Alter the gear ratio by using a smaller pinion or larger spur gear. This will increase torque (and motor life) when running in mud, deeper puddles, or any wet conditions that will increase the load on the motor for an extended period of time.Wet Conditions Maintenance • Remove the battery pack(s) and dry the contacts. If you have an air compressor or a can of compressed air, blow out any water that may be inside the recessed connector housing.• Remove the tires/wheels from the vehicle and gently rinse the mud and dirt off with a garden hose. Avoid rinsing the bearings and transmission.NOTICE: Never use a pressure washer to clean your vehicle.• Use an air compressor or a can of compressed air to dry the vehicle and help remove any water that may have gotten into small crevices or corners.• Spray the bearings, drive train, fasteners and other metal parts with a water-displacing light oil or lubricant. Do not spray the motor. • Let the vehicle air dry before you store it. Water (and oil) may continue to drip for a few hours.• Increase the frequency of disassembly, inspection and lubrication of the following: • Front and rear axle hub assembly bearings. • All transmission cases, gears and differentials. • Motor—clean with an aerosol motor cleaner and re-oil the bushings with lightweight motor oil.Transmitter (SPMSTX200) Frequency 2.4GHzBattery AA × 4Servo (SPMS603) Power Supply 4.8V~6V Output Torque 41.66 oz (3 kg-cm) Operating Speed 0.23sec/60 degrees of travel Size 55.6 × 18 × 30mmElectronic Speed Control (ESC) (DYNS2210) Input Voltage 5–7 cell NiMH/2S LiPo 12T–34T 5–7 cell NiMH/2S-3S* LiPo 35T–55T 12T Motor Limit *This vehicle cannot support Lipo 3S batteries. Electric Capacity Forward 60A/360A Electric Capacity Reverse 30A/180A BEC Voltage 6V Size 37.5 × 37.0 × 18.0mmWeight 1.41 oz (40 g)

PAGE – 4 ============
4ENBRUTUS MONSTER TRUCK™ENINSTALLING THE BATTERY 1. Turn the battery clips ( A) clockwise to remove the battery strap (B).2. Install a fully charged battery. 3. Install the battery strap.4. Turn the battery clips counterclockwise to secure the battery strap.Place foam blocks (ECX236005) in front of the battery so the weight of the battery increases rear traction or in back of the battery to increase steering response.CAUTION: Connecting the battery to the ESC with reversed polarity will cause damage to the ESC, the battery or both. Damage caused by incorrectly connecting the battery is not covered under warranty.ABQUICK START Please read the entire manual to gain a full understanding of the vehicle, fi ne-tuning the setup and performing maintenance. 1. Read the safety precautions found in this manual. 2. Charge a battery for the vehicle. Refer to the included charging warnings and instructions for battery charging information.3. Install the AA batteries in the transmitter. Only use alka- line or rechargeable batteries.4. Install the fully charged battery in the vehicle. 5. Power ON the transmitter and then the vehicle. Wait 5 seconds for the ESC to initialize. Always power the transmitter ON before the vehicle and power it OFF after the vehicle has been powered OFF. 6. Check the steering and throttle control directions. Verify that the servos are moving in the correct direction.7. Drive your vehicle. 8. Perform any necessary maintenance. VEHICLE PREPARATIONS COMPONENTS2.4GHZ DIGITAL RADIO SYSTEM• ECX® Brutus ™ Monster Truck (ECX03055) • Spektrum™ STX2® 2-CH Transmitter (SPMSTX200) • AA (4) Batteries • Dynamite® 550 12T Motor (DYNS1223)• Dynamite® 60A WP Brushed ESC (DYNS2210) • Spektrum™ SRX200 2-CH Receiver (SPMSRX200) NEEDED TO COMPLETEDYN1501Powerstage Bundle – Stage 1 DYN1510Powerstage Bundle – Stage 2

PAGE – 5 ============
5ENBRUTUS MONSTER TRUCK™INSTALLING TRANSMITTER BATTERIES This transmitter requires 4 AA batteries.1. Remove the battery cover from the transmitter. 2. Install the batteries as shown.3. Install the battery cover. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to national regulations.TRANSMITTER CONTROLS 1211348796105121. Steering Wheel Controls direction (left/right) of the model2. Throttle Trigger Controls speed and direction (forward/brake/reverse) of the model3. ON/OFF Switch Turns the power ON/OFF for the transmitter 4. Throttle Limiting Switch Adjusts the throttle limit from 50%, 75%, and 100%5. TH Rate Adjusts the end point of the throttle6. TH Trim Adjusts the throttle neutral point7. TH REV Reverses the function of the speed control when pulled back or pushed forward8. ST REV Reverses the function of the steering when the wheel is turned left or right9. ST Trim Adjusts the steering center point10. ST Rate Adjusts the end point of the steering11. Antenna Transmits the signal to the model 12. Indicator Lights • Solid red lights— indicates radio connectivity and adequate battery power• Flashing red lights— indicates the battery voltage is critically low. Replace batteries CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. CAUTION: NEVER remove the transmitter batteries while the model is powered on. Loss of model control, damage, or injury may occur.

PAGE – 6 ============
6ENBRUTUS MONSTER TRUCK™GETTING STARTED 1. Power on the transmitter. 3. Perform a test of the transmitter’s control of the vehicle with the vehicle’s wheels off the ground. 4. Start driving slowly, and, if the vehicle does not go straight, adjust the steering trim dial on the transmitter. IMPORTANT: Seat the motor brushes by driving smoothly on a fl at surface during use of the fi rst battery charge. Properly seating the motor brushes will increase the life and performance of the motor. 2. Power on the ESC.2.4GHZ DIGITAL RADIO SYSTEMBINDINGBinding is the process of programming the receiver to recognize the GUID (Globally Unique Identifi er) code of a single specifi c transmitter. The STX2® transmitter and SPMSRX200 receiver are bound at the factory. If you need to rebind, follow the instructions below. 1. With the vehicle on a fl at, level surface, insert the Bind Plug in the BIND port on the receiver. 2. Connect a fully charged battery pack to the ESC.3. Power on the ESC. The red LED fl ashes, indicating the receiver is in bind mode.4. Center the ST TRIM and TH TRIM dials on the transmitter. 5. Turn the steering wheel to Full Right. Power the transmitter on while holding the steering wheel to the Right.6. Release the steering wheel when the receiver LED stops fl ashing. 7. Remove the Bind Plug, then power off the receiver to save the settings.8. Power off the transmitter. 9. Remove the bind plug and store it in a convenient place.10. You must rebind when: • Different failsafe positions are desired e.g., when throttle or steering reversing has been changed.• Binding the receiver to a different transmitter. CHANGING THE THROTTLE LIMIT Beginner ModeThrottle Limiting Switch: 50%• Best for learning the basic functions of left, right, stop, brake and reverse• For use in smaller areas • Longest battery life Best Overall Performance (Default)Throttle Limiting Switch: 75%• Great top speed and acceleration • Easier to accelerate in desired direction, especially on loose surfaces when compared to Maximum Speed setup• Run time is greatly increased over Maximum Speed setup with minimal impact to top speedMaximum SpeedThrottle Limiting Switch: 100%• More capable of popping and holding wheelies • Higher top speeds and maximum acceleration Throttle Limit Switch

PAGE – 8 ============
8ENBRUTUS MONSTER TRUCK™ELECTRICAL LAYOUT For correct operation, Channels 1 and 2must be used as shown in the wiring diagram. The motor can be disconnected from the ESC at the connectors in the wiring.MAINTENANCESETTING THE GEAR MESH The gear mesh has already been set at the factory. Setting the gear mesh is only necessary when changing motors or gears.You must remove the vehicle’s gear cover ( A) to make this adjustment. Proper gear mesh (how the gear teeth meet) is important to the performance of the vehicle. When the gear mesh is too loose, the spur gear could be damaged by the pinion gear of the motor. If the mesh is too tight, speed could be limited and the motor and ESC will overheat. Set the gear mesh by following these simple steps:1. Loosen the 2 motor screws (B).2. Put a small piece of paper (C) between the pinion and spur gears.3. Push the gears together while tightening the motor screws.4. Rotate the gears to remove the paper. The gearing should move a small amount.5. Reinstall the gear cover. Part #Description ADYNS1223 Dynamite® 550 12T BBattery (sold separately)CSPMS603* Waterproof Steering ServoDSPMSRX200 ReceiverEDYNS2210 Waterproof Electronic Speed Control (ESC)FChannel 1GChannel 2*OEM part only. Replacement, please use part SPMSS6170.ELECTRONIC SPEED CONTROL (ESC) Programming: The ESC comes with one jumper pre-installed: BATT: Li-Po confi guration. The throttle setting without the jumper indicates Throttle/Brake/Reverse (F/Br/R). Always use this setting for this vehicle.To change the battery type to Ni-MH, disconnect the jumper from the default port and connect it to the Ni-MH port. If the jumper is removed from the BATT port, the default setting is Li-Po mode. Power off the ESC, then power it back on.If the jumpers are lost or not installed, the ESC will default to F/Br/R and BATT: Li-Po. NOTICE: Only use the Ni-MH port when using Ni-MH batteries. Using the Ni-MH port with a Li-Po battery can cause serious damage to the battery and is unsafe.ACBEC3EC3ABCDGFOperationTone Start upOne short tone, followed by one long tone.Low Voltage Cut-Off When low voltage cuttoff is reached, the vehicle will slow and emit a continuous tone.Low Voltage at Start Up When a low battery is plugged in and powered on, the vehicle will emit two low tones and power off.E

PAGE – 9 ============
9ENBRUTUS MONSTER TRUCK™SHOCK CLEANINGOil-fi lled shocks will require regular maintenance due to the oil breaking down or getting dirty. This maintenance should be performed after about every 3 to 5 hours of use, depending on the conditions that the vehicle is used in.• Remove the shock from the vehicle. • Remove the cap from the shock body and dispose of fluid. • Disassemble the shock. Clean thoroughly with a plastic- and electronic-safe degreaser (DYNE50001). Dry parts before assembly. • Re-assemble the shock and refill the shock body with silicone fluid (30 weight recommended).• Slowly move the shaft and piston up and down to remove air bubbles. • Move the piston to the midway point of the body and install the cap. • Wipe off any overflowing fluid. • When properly filled, the piston should rebound about 3/8 in (9.5mm) after being pushed in fully. • Re-install the shock on the vehicle. RIDE HEIGHT ADJUSTMENT Ride height is an adjustment that affects the way the vehicle jumps, turns and goes over bumps. Drop one end of the vehicle from approximately 6 inches (152 mm) in height onto a fl at surface. When dropping the front of the vehicle, after the vehicle settles, make sure the front arms are equal and parallel to the fl at surface. Do the same with the rear to make sure both arms are parallel with the fl at surface. Lowering the front ride height increases steering, but decreases traction. Lowering the rear ride height increases traction, but decreases steering.Part #Description ECX1036 ECX1037 ECX1038 ECX1039 ECX1040 ECX1041 ECX1042 ECX1043 No. Description TAPPINGBINDER HEAD M3x10mmTAPPING BINDER HEAD M3x12mmTAPPING FLAT HEAD M3x15mmTAPPINGFLAT HEAD M3x12mmTAPPINGFLAT HEAD M3x10mmTAPPING BINDER HEAD M3x18mmTAPPING FLAT HEAD M2x16mmTAPPING BINDER HEAD M3x16mmNo. Description WASHER 5x7x0.5mmE-CLIP E2.5LOCK WASHERFLANGEDLOCK NUT M4WASHER3x8x0.5mmLOCK NUT M3WASHER2x7x0.5mmSET SHAFT SCREW M3x13mmNo. DescriptionSETSCREW M3x3mmSETSCREWM3x12mmSTEP SCREWM3x0.5×13.4mmSTEP SCREWM3x0.5×10.5mmBUTTON HEX M2.5x4mmBUTTONHEX M2.5x8mmSTEP SCREWM3x0.5×7.4mmNo. Description BINDER HEAD M3x8mmBINDERHEAD M3x12mmBINDERHEAD M3x20mmBINDERHEAD M3x25mmFASTENERS ECX1043ECX1037ECX1041ECX1037ECX1043ECX1036ECX1038ECX1038ECX1043ECX1037ECX1037ECX1038ECX1037ECX1042ECX1040ECX1057ECX1037ECX1043ECX1038ECX1039ECX1036ECX1038ECX1038ECX1037ECX1057REARFRONT SHOCK ABSORBER PARTS

PAGE – 10 ============
10ENBRUTUS MONSTER TRUCK™TROUBLESHOOTING GUIDE ProblemPossible CauseSolution Short run timeBattery damaged/not chargedCheck/change battery Motor dirtyCheck/clean Sluggish actionMotor dirtyCheck/clean Bind in drivetrainClean/adjust Vehicle battery is not chargedReplace/recharge Controls reversedST. REV or TH. REVChange switch position Motor/ESC overheatOver-geared for the driving environmentInstall smaller pinion on the motor Does not operateTransmitter batteries lowReplace/recharge Transmitter powered offPower on ESC powered offPower on Vehicle battery is not chargedReplace/recharge Dual-rate (D/R) steering and/or throttle knobs on transmitter are turned counterclockwiseAdjust dual-rate (D/R) steering or throttle knobs clockwise to desired settingPoor rangeTransmitter batteries lowReplace/recharge Receiver antenna damagedCheck/repair/replace The system will not connectTransmitter and receiver too near each otherMove transmitter 3.3–9.8ft (1–3m) from receiver Transmitter and receiver too near large metal objects (vehicles, etc.)Move away from large metal objects (vehicles, etc.)Throttle trim out of center on transmitterSet throttle trim on transmitter to zero. Turn off and on transmitter and vehicleReceiver accidentally put in bind mode so receiver is no longer boundRebind transmitter and receiverThe receiver goes into failsafe mode a short distance away from the transmitterCheck the receiver antenna to be sure it is not cut or damagedMake sure the antenna is in the antenna tube Contact Horizon Product SupportThe receiver quits responding during operationLow battery voltageCompletely recharge battery Loose or damaged wires or connectors between battery and receiverDo a check of the wires and connection between battery and receiver. Repair or replace wires and/or connectors Receiver and transmitter are not boundTransmitter accidentally put in bind mode, ending bind to receiverBind transmitter to receiverVehicle moves forward or back- ward without input from userThrottle trim on transmitter not centeredAdjust throttle trim on transmitter to neutral point Car does not drive straightSteering trim on transmitter not centered Adjust steering trim on transmitter so the vehicle drives straightNo steering or lack of steering Steering dual-rate (D/R) on transmitter not adjusted correctlyAdjust steering dual-rate (D/R) knob on transmitter clockwise to desired steering throwServo failedContact Horizon Product Support No throttle or lack of throttleThrottle dual-rate (D/R) on transmitter not adjusted correctlyAdjust throttle dual-rate (D/R) knob on transmitter clockwise to desired steering throwESC failedContact Horizon Product Support Motor failedContact Horizon Product Support Clicking noise in transmission areaDirt or rocks in spur gearRemove gear cover and inspect. If necessary, replace gear Motor moved away from spur gearReset gear mesh

PAGE – 11 ============
11ENBRUTUS MONSTER TRUCK™LIMITED WARRANTY What this Warranty CoversHorizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase. What is Not CoveredThis warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modifi cation of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE. Purchaser’s RemedyHorizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. Limitation of LiabilityHORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, fi nal assembly, modifi cation or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.LawThese terms are governed by Illinois law (without regard to confl ict of law principals). This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.WARRANTY SERVICESQuestions, Assistance, and ServicesYour local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or ServicesIf this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue with a Li-Po battery, please contact the appropriate Horizon Product Support offi ce. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.Non-Warranty ServiceShould your service not be covered by warranty, service will be completed and payment will be required without notifi cation or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notifi cation. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non- compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notifi cation, after which it will be discarded.10/15

218 KB – 18 Pages